- Product Grouping: Fittings and Attachments
- Shape: Other
- Application: Water Treatment, Mining and Resources, Oil and Gas, Manufacturing, Chemical Manufacturing and Distribution, Government and Education, Commercial and Industrial Buildings
- States Available: ACT, NSW, QLD, SA, VIC
Note – The colours shown on screen represent the actual colour as accurately as possible however they will vary depending on web browser, screen and printer type.
Capacities and measurements are tested in accordance with AS4766, but may vary due to the roto-moulding process. Dimensions in metres are rounded to the nearest centimetre.
Dimensions in imperial are rounded to the nearest inch. Subtract 100mm from pump cover dimensions when estimating internal measurements.
When estimating space requirements for siting your tank, Bushmans recommends a minimum clearance of 100mm at top and sides. Read less
Note – The colours shown on screen represent the actual colour as accurately as possible…..Read more
Liquidator 2 Level Gauge – Water and Chemical Tanks
The Liquidator 2 has an external tube guide which does not come into contact with the liquid so is idea for use in chemical tanks. The level indicator operates by sliding up and down the external tube with the counterweight is contained in it. The poly float on the level indicator is the only part of the gauge that comes into contact with the liquid. The Liquidator 2 Level Gauge is ideal for most chemical tanks plus is used extensively in water tanks. The Liquidator is compatible with a wide range of liquids including: sodium silicate, waste oil, waste water, effluent, molasses, wine, olive oil, hydrochloric acid, phosphoric acid, etc. as the polyethylene float is the only part in contact with the liquid.