- Capacity: 3,800 L
- Height: 1.55 m
- Length: 1.85 m
- Width: 1.85 m
- States Available: ACT, NSW, QLD
Note – The colours shown on screen represent the actual colour as accurately as possible however they will vary depending on web browser, screen and printer type.
Capacities and measurements are tested in accordance with AS4766, but may vary due to the roto-moulding process. Dimensions in metres are rounded to the nearest centimetre.
Dimensions in imperial are rounded to the nearest inch. Subtract 100mm from pump cover dimensions when estimating internal measurements.
When estimating space requirements for siting your tank, Bushmans recommends a minimum clearance of 100mm at top and sides. Read less
Note – The colours shown on screen represent the actual colour as accurately as possible…..Read more
3800L Tank Bund
Bunds are used to solve situations where there is a loss of liquids and chemicals from tanks and other storage vessels.
The bund’s spill station catches any leakages of liquids and chemicals from a tank or drum. This aids in reducing costs and ensuring environmental protection through preventing the loss of liquids and chemicals.
Bunding tanks and other containers warrants WHS and environmental protection. Often, governments and environmental regulatory authorities legally require bunding. These design requirements are important and should be referred to.
During the emptying and filling process, chemicals can be spilt. Bunds catch these corrosive and toxic chemicals and prevent loss in the unlikely event that the tank or container fails.
Polyethylene bunds prevent the risk of further leakage as they are non-corrosive. The bunds are rectangular shaped, allowing them to fit most industrial storage situations. The solid design ensures a resilient bunded collection system.
To get more information on the Bushmans bund call on 1300 373 392.