- Capacity: 3,250 L
- Inlet Height: 1.79 m
- Total Height: 2
- Diameter: 1.57 m
- States Available: ACT, NSW, QLD
Note – The colours shown on screen represent the actual colour as accurately as possible however they will vary depending on web browser, screen and printer type.
Capacities and measurements are tested in accordance with AS4766, but may vary due to the roto-moulding process. Dimensions in metres are rounded to the nearest centimetre.
Dimensions in imperial are rounded to the nearest inch. Subtract 100mm from pump cover dimensions when estimating internal measurements.
When estimating space requirements for siting your tank, Bushmans recommends a minimum clearance of 100mm at top and sides. Read less
Note – The colours shown on screen represent the actual colour as accurately as possible…..Read more
3,250 Litre Industrial Tank
The Bushmans TT650 Industrial Tank is ideal for applications that require a relatively small amount of storage.
This tank can be used for storing chemicals and waste water. The TT650 is made out of one piece of polyethylene plastic that is rotationally moulded at high temperatures. This prevents any possible leakages that may occur.
Typically, our industrial range of water tanks has been used in a vast amount of industrial settings. From waste and potable water storage to chemical storage, Bushmans industrial tanks have proved the ideal solution.
The Bushmans TT650 Industrial tank is made using Bushmans Sunsmart® technology, which ensures the tanks utility in Australia’s harsh climate. Bushmans factories are accredited to manufacture to the AS/NZS4766 tank standard. This ensures each tank is made to our design standard.
It can be easily incorporated into an industrial process. The TT650 can be fabricated with a range of industrial fittings to ensure the tank meets the operation requirements of a particular process.
For more information on Bushmans TT650 Industrial tank call on 1300 373 392 or email your local Bushmans service centre.